Electric Motors
 
 
ULTRAline Electric Motors
 
Also See
 
 
 
 
 
General Purpose Single Phase Motors 
 
Four-In-One, Motors
 
  • Totally enclosed fan cooled, (TEFC).
  • C-Face with removable rigid base.
  • 115/208-230 volts.
  • Squirrel cage.
  • 1.15 service factor.
  • Capacitor start for high starting torque.
  • Class F insulation.
  • Double sealed ball bearings.
  • Heavy gauge rolled steel frame.
 
Farm Duty Motors
 
  • Totally enclosed fan cooled (TEFC).
  • Rigid base.
  • 115/208-230 volts and 230 volts.
  • Squirrel cage.
  • 1.15 service factor.
  • Capacitor start for high starting torque.
  • Class F insulation.
  • Double sealed ball bearings.
  • Manual reset thermal protector.
  • Fully gasketed for dirty environments.
  • Shaft slinger.
  • Heavy gauge rolled steel frame.
 
Furnace Motors
 
  • Split Phase Type for low to moderate starting torque.
  • Capacitor Start Type for high starting torque.
  • Resilient “cradle” style base.
  • NEMA service factors.
  • 115 volt and 115/208-230 volt.
  • Ball or Sleeve bearing.
  • Automatic reset thermal overload.
  • 48YZ Frames have both 48/56 mounting holes.
  • Heavy gauge rolled steel frame.
 
General Purpose Three Phase Motors
 
Cast Iron Motors
 
  • 3 year warranty.
  • NEMA Design B or C torques.
  • CSA approved and EEV verified. 
  • Quiet running with minimum noise and vibration.
  • Cool running with low temperature rise ensures long life.
  • Double lip shaft seal keeps out moisture and contamination.
  • Superior class F non-hygroscopic, vacuum pressure impregnated insulation system resists heat and coil movement.
  • Oversize bearings with specially formulated Polyrex EM polyurea grease for smooth running, long life and wide temperature range.
  • Low loss insulated electro-magnetic steel laminations for controlled core loss and maximum efficiency.
 
Four-In-One, Motors
 
  • Totally enclosed fan cooled, (TEFC).
  • C-Face with removable rigid base.
  • 208-230/460 volts and 575 volts.
  • Squirrel cage.
  • 1.15 service factor.
  • Class F insulation.
  • Double sealed ball bearings.
  • NEMA design B.
  • Heavy gauge rolled steel frame.
 
Rolled Steel Motors
 
  • Totally enclosed fan cooled, (TEFC) and Open drip proof (ODP) enclosures.
  • 208-230/460 volts and 575 volts.
  • Squirrel cage.
  • 1.15 service factor.
  • Class F insulation.
  • Double sealed ball bearings.
  • NEMA design B.
  • Heavy gauge rolled steel frame..
 
Stainless Steel Motors
 
  • Food, Chemical, Pharmaceutical duty.
  • 208-230/460 volts and 575 volts.
  • Totally enclosed fan cooled, (TEFC).
  • All 300 Series Stainless Steel External Construction:
    Frame, Endshields, Conduit Box, Shaft, and Base.
  • Condensate drains in each end shield.
  • Spring loaded lip seals at each end.
  • O-Ring type shaft slinger.
  • 1.15 service factor.
  • Class F insulation.
  • Double sealed ball bearings.
  • NEMA design B.
  • C-Face round body and C-Face with rigid base.